IE CREC 3.0T Supercharged Performance ECU Tune | Fits Audi C7.5 A6 & A7
IE CREC 3.0T Supercharged Performance ECU Tune | Fits Audi C7.5 A6 & A7
- 70 % Off$366.79
Description
EASY POWER!
Your 2016-2018 Audi A6/A7 3.0T with the updated CREC supercharged engine capable of massive power gains in only minutes from an IE ECU Tune. Unleash hidden horsepower and torque to turn your sporty A6 or A7 into an extremely competitive powerhouse!
Gain up to 166hp on stock hardware
Up to 524hp with a supercharger pulley upgrade
MAXIMIZED OUTPUT
IE ECU calibrations are dedicated to perfecting every section of the mapping to deliver a fully realized performance file right out of the gate. Maximized for full performance potential on the drag strip and road coarse while maintaining full comfort and reliability on your daily commute. Get ready to experience IE’s Performance Software For your Audi CREC 3.0T Supercharged engine in only minutes from the comfort of your home garage or driveway.
POWER RESULTS
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors. Peak numbers require transmission TCU Tune (sold separately).
| STAGE / FUEL | HORSEPOWER | TORQUE |
|
Stock Audi advertised numbers |
340 HP |
333 FT-LBS |
|
Stock IE dyno numbers |
340 HP |
347 FT-LBS |
|
Stage 1 91 AKI / 95 RON |
423 HP |
384 FT-LBS |
|
Stage 1 93 AKI / 98 RON |
432 HP |
391 FT-LBS |
|
Stage 1 E85 |
506 HP |
414 FT-LBS |
|
Single Pulley 91 AKI / 95 RON |
438 HP |
388 FT-LBS |
|
Single Pulley 93 AKI / 98 RON |
446 HP |
395 FT-LBS |
|
Single Pulley E85 |
524 HP |
438 FT-LBS |
DYNO CHARTS
REQUIRED HARDWARE
-
STAGE 1
-
STAGE 2 SINGLE PULLEY
| PART UPGRADE | COMPATIBLE | REQUIREMENT |
|
TRANSMISSION TUNE |
|
Required For Peak Power Gains |
|
AIR INTAKE |
|
Fully Compatible With All Stages |
|
HEAT EXCHANGER |
|
Fully Compatible With All Stages |
|
IE DOWNPIPES |
|
Fully Compatible With All Stages |
|
UPPER PULLEY |
X |
Not Compatible With Stage 1 |
|
LOWER PULLEY |
X |
Not Compatible With Stage 1 |
CONSUMER NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT (“PRODUCT”), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
ADD TRANSMISSION TUNE
All stages of IE ECU calibrations for the C7.5 A6 & A7 are compatible with the matching IE ZF8 AL551 Transmission TCU Tune and is highly recommended to reach the advertised power figures. Without a matching TCU tune, the transmission will short shift the powerband at 6300 RPM vs. the ECU tune’s peak power at 7200RPM -leaving power on the table. Adding the TCU upgrade also modifies shift speed, torque limit maps, line pressure, and launch control functions resulting in a complete ECU & TCU performance package.
ZF8 TCU TUNE
Additional information
| Stage | Stage 1, Stage 2 |
|---|---|
| ADD IE ZF8 TRANS TUNE | No Thanks, Yes – ADD IE ZF8 Trans Tune |
Related products
-
- 70 % Off -
- 70 % Off -
- 70 % Off -
- 70 % Off
